Pleated Cartridges
series APKPVHE
(high efficiency)

 

   
Pleated Polypropylene High Efficiency Filters use superior gradient density micro fiber mediatechnology to provide an excellent combination of highly efficient filtration with high flow rates and high contaminate holding capacity. They are precisely manufactured in clean room conditions
from 100% polypropylene, FDA approved, materials. The all polypropylene construction offers a wide range of chemical compatibility suitable for many demanding process industries. Typical applications are within the electronics, beverage, brewing, food and water treatment industries. Prime applications are within the Reverse Osmosis industry where the filters are ideally suited to be used as pre-filters to protect the membrane filter.

- Manufactured in clean room conditions using specialized equipment with precise digital control.
- Process and product quality control to ISO 9001:2000 quality accreditation.
- Fully ultrasonic and thermally welded construction. No additives.
- In-house manufacture of component parts ensuring high quality materials used and complete product traceability

SPECIFICATIONS

• All Polypropylene construction using FDA approved materials
• 0.2 micron to 30 micron ratings
• Up to 99.99% efficient
• Full range of end caps and seal materials to suit most filter vessels and applications
• Gradient density microfibre media
• High surface area
• No fiber migration
• Autoclave options available


carouches filtrantes haute efficacité

 
Particle removing ratings Filtration area
Seuil d'efficacité
P0.2
P0.45
P1.0
P5.0
P20
99,99%
1.0
1.45
2.0
5.0
30
99,90%
0.8
1.0
1.5
3.1
25
99,00%
0.6
0.75
1.0
2.4
15
98,00%
0.2
0.45
0.75
2.0
8
Longueur
Surface
mm
inches
ft²
248/254
10
0.57
6.12
508
20
1.14
12.24
762
30
1.71
18.36
1016
40
2.28
24.48
 
Flow rate graphs (flow rates are shown for 10” filter cartridges and water based fluids at 21°C)
 
End cap styles
 
Technical specifications

Length
9 3/4" (248 mm), 10" (254 mm), 20" (508 mm), 30" (762 mm), 40" (1016 mm)

Micron
0,2 - 0,45 - 0,75 - 2 - 8 micron (98%)
1 - 1,5 - 2 - 5 - 30 (99,99%)

End cap
7F (226 O-ring - flat) - 7S (226 O-ring - spear) - 3F (222 O-ring - flat) - 3S (222 O-ring - spear)

Gaskets
N (Neoprene) - E (EPDM) - B (Buna-N) - S (Silicone) - V (Viton A)

 


FILTERMAT YOUR RELIABLE PARTNER


Filtermat filters
Telephone +32-3-711.03.57 or +32-3-710.65.50
Fax +32-3-711.03.58 or +32-3-710.65.58
Address Winninglaan 17, B-9140 Temse (Belgium)
Email info@filtermat.be
Website www.filtermat.be