LOFTREX
Industrial filtercartridges

LOFTREX filtercartridges :

  • are made of pure polypropylene (melt blown) micro fibers, thermally bonded to prevent any fibre migration
  • comply with FDA requirements and are free of any binding agents
  • are depth filters, they have a high pore volume and high dirt holding capacity
  • are temperaure resistant to 80°C. The polypropylene material offers excellent chemical compatibility

 

 
Applications examples :  
Water treatment, pure water pre-filtration, edible oils, fine chemicals, resins, reverse osmosis, DI water, sea water destination, wine (pre-filtration), beverages, film development, fixing baths, solvents, cosmetics, galvanic baths.
     
Technical data :    
Filter fineness (nominal) 1 - 75 µm
Length 5" till 40" (50" upon request)
Inside diameter 28 mm
Outside diameter 64 mm
Max. working temperature 80°C
Max. diff. pressure 2,5 bar at 30°C
 
Pressure drop (delta-P)

The table below details the pressure drop-flow rate characteristics of LOTREX cartridges flowing water at 20°C. Flow rate is stated as flow per 9 3/4" length. For fluids of other viscosities, multiply the indicated delta-P by the fluid viscosity in centipoise.
 
 
Product code :
LX
-
20
-
75
  
 
Loftrex
  
Length
  
Filter fineness
 
     
05
 = 5" (127 mm)  
1 - 3 - 5 - 10 - 20 - 30 - 50 - 75
  
     
09
 = 9 3/4" (248 mm)  
     
10
= 10" (254 mm)      
     
19
= 19 1/2" (496 mm)      
     
20
= 20" (508 mm)      
     
29
= 29 1/4" (744 mm)      
     
30
 = 30" (762 mm)      
     
39
 = 39" (992 mm)      
     
40
 = 40" (1016 mm)      
     
50
 = 50" (1270 mm)      
Telephone +32-3-711.03.57 or +32-3-710.65.50
Fax +32-3-711.03.58 or +32-3-710.65.58
Address Winninglaan 17, B-9140 Temse (Belgium)
Email info@filtermat.be
Website www.filtermat.be