PP10 Convertible Filter Housing

	PP10 CONVERTIBLE FILTER HOUSING FOR BAG OR CARTRIDGE

The Right Choice for many applications and for many reasons Filtermat's PP10 Convertible Filter Housing provides an excellent, low cost alternative to other types of filter housings.

Filtermat's PP10 is lightweight and chemical-resistant manufactured from polypropylene with a UV inhibitor for all-weather durability, PP10 housings are strong, lightweight and economical.

Resistant to a wide range of chemicals for a wide range of industrial applications, the PP10 will precisely fit your particular needs.

Easy Cleaning is another PP10 trademark.

Filtermat engineered the PP10 convertible filter housing with a “clean wall” design, a smooth interior surface that allows faster, easier manual cleaning or in-place flushing.

The PP10 Filter Housing is convertible designed to accept either a bag filter or a cartridge filter, the Filtermat PP10 filter housing allows you to choose the filter media and construction to precisely fit your filtering needs.




Additional PP10 Attributes The PP10 Convertible Filter Housing can be easily converted to accept a filter bag or filter cartridge. To convert the housing: • to filter bag operation: order the PP10 Plastic Basket • to filter cartridge operation: order the Cartridge Plate and Plate Gasket Replacement parts for the PP10 Convertible Filter Housings are also available through Filtermat. Whatever your application, Filtermat's PP10 filter housing is highly adaptable. A choice of filter elements and a complete line of accessories allow the PP10 to be your best filter choice.

	Filter Bag Measuring 6" (150 mm) in diameter by a length of 20" (500 mm), the filter bag has 2 ft² of surface area (0.186 m²), making it equivalent to a standard #1 size bag. The filter bag is fitted with a Plastic Ring that seals directly against the wall of the filter housing and eliminates the chance of fluid by-pass. A heavy-duty Polypropylene Restrainer Basket supports the filter bag. The Plastic Ring sits directly against the basket collar for additional bag support.
	*

	Filter Cartridge The filter cartridge is a steep pore gradient, depth filter designed to have a large dirt loading capacity. The cartridge measures 5.5" (140 mm) in diameter, with a length of 23.25" (590 mm). In laboratory test the cartridge has outperformed standard 10" cartridges by holding 20 times the volume of dirt. The design of the cartridge features a single open end that directs fluid from outside the cartridge in through the filter. A built-in handle on the cartridge top assists in seating and removing the cartridge. The cartridge bottom is equipped with a fitting to ensure a by-pass-free sealing without the need for double O-rings or flat gaskets. Fitting securely into the cartridge plate, the cartridge does not require springs, hold-down plates or center posts.
	*

* Maximum flow rate GPM is the MAXIMUM FLOW RATE recommended through the vessel without filter cartridges installed using water as a base. Any increase in fluid viscosity, or the installation of filter cartridges,will reduce the maximum flow figures significantly. To achieve the filtration efficiency required,the suggested maximum flow rate is 12 m³/h.


Accessories PP10 Plastic Leg Stands Lightweight molded plastic leg assemblies are designed to mount directly on the PP10 Convertible Filter Housing, providing an economical means for supporting the vessel during installation and operation. PP10 Metal Leg Stands Tripod leg stands are available in either carbon steel or 304 stainless steel for heavy-duty vessel support. Dual rubber-lined metal bands and bolt tightening assemblies assure a secure installation.

Features	Benefits
Filter elements top loaded	No sump disassembly
Polypropylene construction	Lightweight, chemically resistant
Convertible	Uses cartridges or bags
Positive sealing	No fluid by-pass
Clean wall design	Easy access for manual cleaning or in-place flushing
FDA, NSF and CE Mark	Meets Certification Requirements

HOUSING SPECIFICATIONS - ASME Code Not Required
Model No.	Description	Includes
PP10B	Plastic bag vessel (BUNA)	Housing, lid, basket, lid gasket (BUNA)
PP10C	NSF Certified Plastic Cartridge Vessel (BUNA)	Housing, lid, cartridge plate, lid gasket & plate gasket (BUNA)

BAG & CARTRIDGE FILTERS
Description	Micron Rating	Material
Filter bag	1,5,10,25,50,100	polypropylene
Filter bag	1, 2, 10, 25, 90	polypropylene
Filter cartridge	1, 5, 10, 25, 50, 75, 100	polypropylene

FILTERMAT your reliable partner !

Filtermat filters
Telephone	+32-3-711.03.57 of +32-3-710.65.50
Fax	+32-3-711.03.58 of +32-3-710.65.58
Address	Winninglaan 17, B-9140 Temse (Belgium)
Email	info@filtermat.be
Website	www.filtermat.be